Raktim Bhattacharya. . AERO 422: Active Controls for Aerospace Vehicles. Frequency ResponseDesign Method


 Anis Chambers
 3 years ago
 Views:
Transcription
1 .. AERO 422: Active Controls for Aerospace Vehicles Frequency Response Method Raktim Bhattacharya Laboratory For Uncertainty Quantification Aerospace Engineering, Texas A&M University.
2
3 ... Response to Sinusoidal Input.. u(t) y(t). P Let u(t) = A u sin(ωt) Vary ω from to A linear system s response to sinusoidal inputs is called the system s frequency response AERO 422, Instructor: Raktim Bhattacharya 3 / 52
4 ... Response to Sinusoidal Input.. Example Let P (s) = s+, u(t) = sin(t) y(t) = 2 e t 2 cos(t) + 2 sin(t) = 2 e t + sin(t π }{{} 2 4 ) }{{} natural response forced response Forced response has form A y sin(ωt + ϕ) A y and ϕ are functions of ω AERO 422, Instructor: Raktim Bhattacharya 4 / 52
5 ... Response to Sinusoidal Input.. Generalization In general ω Y (s) = G(s) s 2 + ω 2 = α α n + + α + α s p s p n s + jω s jω = y(t) = α e pt + + α n e p nt + A }{{} y sin(ω + ϕ) }{{} natural forced Forced response has same frequency, different amplitude and phase. AERO 422, Instructor: Raktim Bhattacharya 5 / 52
6 ... Response to Sinusoidal Input.. Generalization (contd.) For a system P (s) and input u(t) = A u sin(ω t), forced response is y(t) = A u M sin(ω t + ϕ), where M(ω ) = P (s) s=jω = P (jω ), magnitude ϕ(ω ) = P (jω ) phase In polar form P (jω ) = Me jϕ. AERO 422, Instructor: Raktim Bhattacharya 6 / 52
7
8 ... Fourier Series Expansion.. Given a signal y(t) with periodicity T, y(t) = a 2 + ( 2πnt a n cos T a = 2 T a n = 2 T b n = 2 T n=,2, T T T y(t)dt ( 2πnt y(t) cos T ( 2πnt y(t) sin T ) dt ) dt ) + b n sin ( ) 2πnt T AERO 422, Instructor: Raktim Bhattacharya 8 / 52
9 ... Fourier Series Expansion.. Approximation of step function.2 N=2.2 N= N=8.2 N= N=2.2 N= AERO 422, Instructor: Raktim Bhattacharya 9 / 52
10 .. Fourier Transform... Step function Fourier transform reveals the frequency content of a signal AERO 422, Instructor: Raktim Bhattacharya / 52
11 .. Fourier Transform... Step function frequency content.2.8 y(t) t ŷ(ω) ω AERO 422, Instructor: Raktim Bhattacharya / 52
12 .. Signals & Systems... Input Output. u(t) P y(t) Fourier Series Expansion superposition principle. i u i(t) P i y i(t) Fourier Transform Ụ(jω) Y (jω). P u i (t) = a i sin(ω i t) y iforced (t) = a i M sin(ω i t + ϕ) Y (jω) = P (jω)u(jω) Suffices to study P (jω) P (jω), P (jω) AERO 422, Instructor: Raktim Bhattacharya 2 / 52
13
14 .. First Order System... Bode Diagram Freq =. rad/s 5 y(t) y(t) y(t) Freq =. rad/s Freq = 5. rad/s Phase (deg) 45 y(t) Freq =. rad/s P (s) = /(s + ) loglog scale db = log ( ) 2dB = log (/) u(t) = A sin(ω t) y forced (t) = AM sin(ω t + ϕ) AERO 422, Instructor: Raktim Bhattacharya 4 / 52
15 ... Second Order System Bode Diagram y(t) y(t) 2 Freq =. rad/s Freq =. rad/s Freq = 5. rad/s Phase (deg) y(t) y(t) Freq =. rad/s P (s) = /(s 2 +.5s + ) ω n = rad/s u(t) = A sin(ω t) y forced (t) = AM sin(ω t + ϕ) AERO 422, Instructor: Raktim Bhattacharya 5 / 52
16 .. Lead Compensator 5 5 Lead Controller. Phase lead low gain at low frequency high gain at high frequency.. relate it to derivative control 5 6 Phase (deg) AERO 422, Instructor: Raktim Bhattacharya 6 / 52
17 .. Lag Compensator Lag Controller. Phase lag high gain at low frequency low gain at high frequency relate it to integral control.. 5 Phase (deg) AERO 422, Instructor: Raktim Bhattacharya 7 / 52
18 .. S(jω) + T (jω) =. d.. n r + u e y + y. m C P y m Magnitude S(jω) P (s) = C(s) = (s+)(s/2+) S = G er = +P C = +P T = G yr = P C +P C = P +P ω rad/s Bode Diagram S T S+T Magnitude T(jω) ω rad/s AERO 422, Instructor: Raktim Bhattacharya 8 / 52
19 .. All transfer functions... With proportional controller G er G ed G en G yr G yd G yn AERO 422, Instructor: Raktim Bhattacharya 9 / 52
20 ... Piper Dakota Control System.. ed with root locus method System Transfer function from δ e (elevator angle) to θ (pitch angle) is P (s) = θ(s) δ e (s) = 6(s + 2.5)(s +.7) (s 2 + 5s + 4)(s 2 +.3s +.6) Control Objective an autopilot so that the step response to elevator input has t r < and M p < % = ω n >.8 rad/s and ζ >.6 2 nd order Controller C(s) =.5 s + 3 ( +.5/s) s + 25 AERO 422, Instructor: Raktim Bhattacharya 2 / 52
21 ... Piper Dakota Control System.. Time Response Ref to Control Ref to Error Ref to Output.5.5 Elevator angle (deg).5 Error (deg).5 Pitch Angle (deg) Time (seconds).5 2 Time (seconds) 2 Time (seconds) Dist to Control Dist to Error Dist to Output 5 Elevator angle (deg).5 Error (deg) Pitch angle (deg) Time (seconds) Time (seconds) 2 4 Time (seconds) AERO 422, Instructor: Raktim Bhattacharya 2 / 52
22 ... Piper Dakota Control System.. Frequency Response G er G ed G en G yr G yd G yn AERO 422, Instructor: Raktim Bhattacharya 22 / 52
23 ... Piper Dakota Control System.. Frequency Response (contd.) G ur G ud AERO 422, Instructor: Raktim Bhattacharya 23 / 52
24
25 ... Approximate.. Useful for & Analysis Let openloop transfer function be Write in Bode form KG(s) = K (s z )(s z 2 ) (s p )(s p 2 ) KG(jω) = K (jωτ + )(jωτ 2 + ) (jωτ a + )(jωτ b + ) K is the DC gain of the system. Example G(s) = (s + ) (s + 2)(s + 3) = G(jω) = jω + (jω + 2)(jω + 3) = 6 jω + (jω/2 + )(jω/3 + ) AERO 422, Instructor: Raktim Bhattacharya 25 / 52
26 ... Approximate.. contd. Transfer function in Bode Form KG(jω) = K (jωτ + )(jωτ 2 + ) (jωτ a + )(jωτ b + ) Three cases. K (jω) n pole, zero at origin 2. (jω + ) ± real pole, zero 3. [ ( jω ω n ) 2 + 2ζ jω ω n + ] ± complex pole, zero AERO 422, Instructor: Raktim Bhattacharya 26 / 52
27 ..... Case: K (jω) n pole, zero at origin Gain log K (jω) n = log K + n log jw = log K + n log w Phase K (jω) n = K + n jω = + n Gain Phase (a) Gain (b) Phase AERO 422, Instructor: Raktim Bhattacharya 27 / 52
28 ..... Case:2 (jωτ + ) ± real pole, zero Gain (jωτ + ) = Frequency ω = /τ is the break point {, ωτ <<, jωτ, ωτ >>. 2 Gain AERO 422, Instructor: Raktim Bhattacharya 28 / 52
29 ... Case:2 (jωτ + ) ± real pole, zero (contd.).. Phase, ωτ <<, = jωτ + = jωτ, ωτ >>, jωτ = 9 ωτ, jωτ + = Phase AERO 422, Instructor: Raktim Bhattacharya 29 / 52
30 .. Example... G(s) = 2(s +.5) s(s + )(s + 5) Bode Diagram Bode Diagram Phase (deg) Phase (deg) AERO 422, Instructor: Raktim Bhattacharya 3 / 52
31 Errors
32 .. Closedloop system... r + e u y. C P y Closedloop transfer function G er = + P C = K (jω) n (jωτ + )(jωτ 2 + ) (jωτ a + )(jωτ b + ) Steadystate gain lim sger(s) s s lim Ger(jω) ω P C = 2(s +.5) s(s + )(s + 5) Typically analysis is done with openloop system Bode Diagram AERO 422, Instructor: Raktim Bhattacharya 32 / 52
33 .. Openloop system... r + e u y. C P y Openloop transfer function 2(s +.5) P C = s(s + )(s + 5) = K (jω) n (jωτ + )(jωτ 2 + ) (jωτ a + )(jωτ b + ) Steadystate error step e ss = Steadystate error ramp + K p, K p := K. 4 2 Bode Diagram e ss = K v 2 4 System type is the slope of the low frequency asymptote K v is the value of low frequency asymptote at ω = rad/s AERO 422, Instructor: Raktim Bhattacharya 33 / 52
34 Analysis
35 .. r + e u y. C P y Given openloop data C(s) = K, P (s) = s(s+) 2 Imaginary Axis (seconds ) Root Locus. All points on root locus satisfy + P (s)c(s) = P (s)c(s) = = P (s)c(s) = and P (s)c(s) = 8 At neutral stability point s = jω, P (jω)c(jω) = P (jω)c(jω) = Stable for K < 2 Real Axis (seconds ) AERO 422, Instructor: Raktim Bhattacharya 35 / 52
36 ... P (jω)c(jω) < at P (jω)c(jω) = 8.. Bode Diagram 5 5 Phase (deg) K=. K=2 K= AERO 422, Instructor: Raktim Bhattacharya 36 / 52
37 .. Gain Margin... Open loop Bode Diagram 5 5 Phase (deg) K=. K=2 K= Gain Margin (GM): factor by which gain can be increased at P (jω)c(jω) = 8 AERO 422, Instructor: Raktim Bhattacharya 37 / 52
38 .. Phase Margin... Open loop Bode Diagram 5 5 Phase (deg) K=. K=2 K= Phase Margin (PM): amount by which phase exceeds 8 at P (jω)c(jω) = AERO 422, Instructor: Raktim Bhattacharya 38 / 52
39 .. Nyquist Plot... Relates openloop frequency response to number of unstable closedloop poles Residue theorem in complex analysis Plot P (jω)c(jω) in the complex plain Number of encirclements of equals Z P of + P (s)c(s) AERO 422, Instructor: Raktim Bhattacharya 39 / 52
40 .. Nyquist Plot... contd. Write P (s)c(s) = KG(s) = K N(s) D(s) = + P (s)c(s) = D(s) + KN(s) D(s) Poles of + P (s)c(s) = Poles of G(s) none of them on RHP Number of encirclements = number of zeros of + P (s)c(s) on RHP number of poles of closedloop system AERO 422, Instructor: Raktim Bhattacharya 4 / 52
41 .. Nyquist Plot... Example: P (s)c(s) = K s(s+) 2 Nyquist Diagram 3 2 K= K=2 K= Imaginary Axis Real Axis AERO 422, Instructor: Raktim Bhattacharya 4 / 52
42 .. Nyquist Plot Determining Gain. Given P (s)c(s) = K, what is K for stability? s(s+) 2 Encirclement of /K + G(s) =.. Nyquist Diagram 2.5 Imaginary Axis Real Axis AERO 422, Instructor: Raktim Bhattacharya 42 / 52
43 .. Nyquist Plot... Gain and Phase Margin Nyquist plot of P (s)c(s) Nyquist Diagram 2.5 Imaginary Axis Real Axis AERO 422, Instructor: Raktim Bhattacharya 43 / 52
44 Frequency Domain
45 ... Using of P (jω)c(jω) Loop Shaping.. Develop conditions on the Bode plot of the open loop transfer function Sensitivity +P C Steadystate errors: slope and magnitude at lim ω Robust to sensor noise Disturbance rejection Controller roll off = not excite highfrequency modes of plant Robust to plant uncertainty Look at Bode plot of L(jω) := P (jω)c(jw) AERO 422, Instructor: Raktim Bhattacharya 45 / 52
46 ... Frquency Domain Specifications Constraints on the shape of L(jω).. P (j!)c(j!) Steadystate error boundary slope! c Sensor noise, plant uncertainty! Choose C(jω) to ensure L(jω) does not violate the constraints Slope at ω c ensures P M 9 stable if P M > = Sensor noise, disturbance Plant uncertainty P C > 8 AERO 422, Instructor: Raktim Bhattacharya 46 / 52
47 .. Plant Uncertainty... P (jω) = P (jω)( + P (jω)) Bode Diagram 5 5 True Model Unc+ Unc P (j!)c(j!) Steadystate error boundary slope!c Sensor noise, plant uncertainty! slope 5 2 P (j!)c(j!) Steadystate error boundary!c Sensor noise, disturbance Plant uncertainty! AERO 422, Instructor: Raktim Bhattacharya 47 / 52
48 ... Sensor Characteristics.. Noise spectrum P (j!)c(j!) Steadystate error boundary slope!c Sensor noise, plant uncertainty! P (j!)c(j!) slope!c Steadystate error boundary Sensor noise, disturbance Plant uncertainty! G yn = P C + P C AERO 422, Instructor: Raktim Bhattacharya 48 / 52
49 .. Reference Tracking... Bandlimited else conflicts with noise rejection Spectrum of r(t) X(f) P (j!)c(j!) Steadystate error boundary slope!c Sensor noise, plant uncertainty! Frequency (Hz) X(f) Spectrum of n(t) slope Sensor noise, disturbance Plant uncertainty!!c Steadystate error boundary Frequency (Hz) P (j!)c(j!) G yr = G yn = P C +P C P C + P C AERO 422, Instructor: Raktim Bhattacharya 49 / 52
50 ... Disturbance Rejecton.. Bandlimited else conflicts with noise rejection Spectrum of d(t) X(f) P (j!)c(j!) Steadystate error boundary slope!c Sensor noise, plant uncertainty! Frequency (Hz) X(f) Spectrum of n(t) slope Sensor noise, disturbance Plant uncertainty!!c Steadystate error boundary Frequency (Hz) P (j!)c(j!) G yd = G yn = P C +P C P + P C AERO 422, Instructor: Raktim Bhattacharya 5 / 52
51 ..... AERO 422, Instructor: Raktim Bhattacharya 5 / 52
Raktim Bhattacharya. . AERO 632: Design of Advance Flight Control System. Preliminaries
. AERO 632: of Advance Flight Control System. Preliminaries Raktim Bhattacharya Laboratory For Uncertainty Quantification Aerospace Engineering, Texas A&M University. Preliminaries Signals & Systems Laplace
More informationRaktim Bhattacharya. . AERO 422: Active Controls for Aerospace Vehicles. Basic Feedback Analysis & Design
AERO 422: Active Controls for Aerospace Vehicles Basic Feedback Analysis & Design Raktim Bhattacharya Laboratory For Uncertainty Quantification Aerospace Engineering, Texas A&M University Routh s Stability
More informationRaktim Bhattacharya. . AERO 422: Active Controls for Aerospace Vehicles. Dynamic Response
.. AERO 422: Active Controls for Aerospace Vehicles Dynamic Response Raktim Bhattacharya Laboratory For Uncertainty Quantification Aerospace Engineering, Texas A&M University. . Previous Class...........
More informationProportional, Integral & Derivative Control Design. Raktim Bhattacharya
AERO 422: Active Controls for Aerospace Vehicles Proportional, ntegral & Derivative Control Design Raktim Bhattacharya Laboratory For Uncertainty Quantification Aerospace Engineering, Texas A&M University
More informationExercise 1 (A Nonminimum Phase System)
Prof. Dr. E. Frazzoli 559 Control Systems I (Autumn 27) Solution Exercise Set 2 Loop Shaping clruch@ethz.ch, 8th December 27 Exercise (A Nonminimum Phase System) To decrease the rise time of the system,
More informationExercise 1 (A Nonminimum Phase System)
Prof. Dr. E. Frazzoli 559 Control Systems I (HS 25) Solution Exercise Set Loop Shaping Noele Norris, 9th December 26 Exercise (A Nonminimum Phase System) To increase the rise time of the system, we
More informationIntroduction. Performance and Robustness (Chapter 1) Advanced Control Systems Spring / 31
Introduction Classical Control Robust Control u(t) y(t) G u(t) G + y(t) G : nominal model G = G + : plant uncertainty Uncertainty sources : Structured : parametric uncertainty, multimodel uncertainty Unstructured
More informationFrequency methods for the analysis of feedback systems. Lecture 6. Loop analysis of feedback systems. Nyquist approach to study stability
Lecture 6. Loop analysis of feedback systems 1. Motivation 2. Graphical representation of frequency response: Bode and Nyquist curves 3. Nyquist stability theorem 4. Stability margins Frequency methods
More informationControl System Design
ELEC ENG 4CL4: Control System Design Notes for Lecture #11 Wednesday, January 28, 2004 Dr. Ian C. Bruce Room: CRL229 Phone ext.: 26984 Email: ibruce@mail.ece.mcmaster.ca Relative Stability: Stability
More informationControl Systems I Lecture 10: System Specifications
Control Systems I Lecture 10: System Specifications Readings: Guzzella, Chapter 10 Emilio Frazzoli Institute for Dynamic Systems and Control DMAVT ETH Zürich November 24, 2017 E. Frazzoli (ETH) Lecture
More informationFrequency domain analysis
Automatic Control 2 Frequency domain analysis Prof. Alberto Bemporad University of Trento Academic year 20102011 Prof. Alberto Bemporad (University of Trento) Automatic Control 2 Academic year 20102011
More informationAnalysis of SISO Control Loops
Chapter 5 Analysis of SISO Control Loops Topics to be covered For a given controller and plant connected in feedback we ask and answer the following questions: Is the loop stable? What are the sensitivities
More informationMAE 143B  Homework 9
MAE 143B  Homework 9 7.1 a) We have stable firstorder poles at p 1 = 1 and p 2 = 1. For small values of ω, we recover the DC gain K = lim ω G(jω) = 1 1 = 2dB. Having this finite limit, our straightline
More informationProcess Control & Instrumentation (CH 3040)
Firstorder systems Process Control & Instrumentation (CH 3040) Arun K. Tangirala Department of Chemical Engineering, IIT Madras January  April 010 Lectures: Mon, Tue, Wed, Fri Extra class: Thu A firstorder
More informationPlan of the Lecture. Goal: wrap up lead and lag control; start looking at frequency response as an alternative methodology for control systems design.
Plan of the Lecture Review: design using Root Locus; dynamic compensation; PD and lead control Today s topic: PI and lag control; introduction to frequencyresponse design method Goal: wrap up lead and
More informationNyquist Criterion For Stability of Closed Loop System
Nyquist Criterion For Stability of Closed Loop System Prof. N. Puri ECE Department, Rutgers University Nyquist Theorem Given a closed loop system: r(t) + KG(s) = K N(s) c(t) H(s) = KG(s) +KG(s) = KN(s)
More informationDESIGN USING TRANSFORMATION TECHNIQUE CLASSICAL METHOD
206 Spring Semester ELEC733 Digital Control System LECTURE 7: DESIGN USING TRANSFORMATION TECHNIQUE CLASSICAL METHOD For a unit ramp input Tz Ez ( ) 2 ( z ) D( z) G( z) Tz e( ) lim( z) z 2 ( z ) D( z)
More informationFrequency Response Techniques
4th Edition T E N Frequency Response Techniques SOLUTION TO CASE STUDY CHALLENGE Antenna Control: Stability Design and Transient Performance First find the forward transfer function, G(s). Pot: K 1 = 10
More informationCDS 101/110a: Lecture 81 Frequency Domain Design
CDS 11/11a: Lecture 81 Frequency Domain Design Richard M. Murray 17 November 28 Goals: Describe canonical control design problem and standard performance measures Show how to use loop shaping to achieve
More informationHomework 7  Solutions
Homework 7  Solutions Note: This homework is worth a total of 48 points. 1. Compensators (9 points) For a unity feedback system given below, with G(s) = K s(s + 5)(s + 11) do the following: (c) Find the
More informationSingular Value Decomposition Analysis
Singular Value Decomposition Analysis Singular Value Decomposition Analysis Introduction Introduce a linear algebra tool: singular values of a matrix Motivation Why do we need singular values in MIMO control
More informationEE3CL4: Introduction to Linear Control Systems
1 / 30 EE3CL4: Introduction to Linear Control Systems Section 9: of and using Techniques McMaster University Winter 2017 2 / 30 Outline 1 2 3 4 / 30 domain analysis Analyze closed loop using open loop
More informationAutomatic Control 2. Loop shaping. Prof. Alberto Bemporad. University of Trento. Academic year
Automatic Control 2 Loop shaping Prof. Alberto Bemporad University of Trento Academic year 21211 Prof. Alberto Bemporad (University of Trento) Automatic Control 2 Academic year 21211 1 / 39 Feedback
More informationThe loop shaping paradigm. Lecture 7. Loop analysis of feedback systems (2) Essential specifications (2)
Lecture 7. Loop analysis of feedback systems (2). Loop shaping 2. Performance limitations The loop shaping paradigm. Estimate performance and robustness of the feedback system from the loop transfer L(jω)
More informationEE C128 / ME C134 Fall 2014 HW 8  Solutions. HW 8  Solutions
EE C28 / ME C34 Fall 24 HW 8  Solutions HW 8  Solutions. Transient Response Design via Gain Adjustment For a transfer function G(s) = in negative feedback, find the gain to yield a 5% s(s+2)(s+85) overshoot
More informationRadar Dish. Armature controlled dc motor. Inside. θ r input. Outside. θ D output. θ m. Gearbox. Control Transmitter. Control. θ D.
Radar Dish ME 304 CONTROL SYSTEMS Mechanical Engineering Department, Middle East Technical University Armature controlled dc motor Outside θ D output Inside θ r input r θ m Gearbox Control Transmitter
More informationMASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Mechanical Engineering Dynamics and Control II Fall 2007
MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Mechanical Engineering.4 Dynamics and Control II Fall 7 Problem Set #9 Solution Posted: Sunday, Dec., 7. The.4 Tower system. The system parameters are
More informationClassify a transfer function to see which order or ramp it can follow and with which expected error.
Dr. J. Tani, Prof. Dr. E. Frazzoli 505900 Control Systems I (Autumn 208) Exercise Set 0 Topic: Specifications for Feedback Systems Discussion: 30.. 208 Learning objectives: The student can grizzi@ethz.ch,
More informationLecture 5: Frequency domain analysis: Nyquist, Bode Diagrams, second order systems, system types
Lecture 5: Frequency domain analysis: Nyquist, Bode Diagrams, second order systems, system types Venkata Sonti Department of Mechanical Engineering Indian Institute of Science Bangalore, India, 562 This
More informationPrüfung Regelungstechnik I (Control Systems I) Übersetzungshilfe / Translation aid (English) To be returned at the end of the exam!
Prüfung Regelungstechnik I (Control Systems I) Prof. Dr. Lino Guzzella 29. 8. 2 Übersetzungshilfe / Translation aid (English) To be returned at the end of the exam! Do not mark up this translation aid
More informationToday (10/23/01) Today. Reading Assignment: 6.3. Gain/phase margin lead/lag compensator Ref. 6.4, 6.7, 6.10
Today Today (10/23/01) Gain/phase margin lead/lag compensator Ref. 6.4, 6.7, 6.10 Reading Assignment: 6.3 Last Time In the last lecture, we discussed control design through shaping of the loop gain GK:
More informationTopic # Feedback Control
Topic #4 16.31 Feedback Control Stability in the Frequency Domain Nyquist Stability Theorem Examples Appendix (details) This is the basis of future robustness tests. Fall 2007 16.31 4 2 Frequency Stability
More informationThe FrequencyResponse
6 The FrequencyResponse Design Method A Perspective on the FrequencyResponse Design Method The design of feedback control systems in industry is probably accomplished using frequencyresponse methods
More informationOutline. Classical Control. Lecture 1
Outline Outline Outline 1 Introduction 2 Prerequisites Block diagram for system modeling Modeling Mechanical Electrical Outline Introduction Background Basic Systems Models/Transfers functions 1 Introduction
More informationEECS C128/ ME C134 Final Thu. May 14, pm. Closed book. One page, 2 sides of formula sheets. No calculators.
Name: SID: EECS C28/ ME C34 Final Thu. May 4, 25 58 pm Closed book. One page, 2 sides of formula sheets. No calculators. There are 8 problems worth points total. Problem Points Score 4 2 4 3 6 4 8 5 3
More informationÜbersetzungshilfe / Translation aid (English) To be returned at the end of the exam!
Prüfung Regelungstechnik I (Control Systems I) Prof. Dr. Lino Guzzella 5. 2. 2 Übersetzungshilfe / Translation aid (English) To be returned at the end of the exam! Do not mark up this translation aid 
More informationSystems Analysis and Control
Systems Analysis and Control Matthew M. Peet Arizona State University Lecture 21: Stability Margins and Closing the Loop Overview In this Lecture, you will learn: Closing the Loop Effect on Bode Plot Effect
More informationÜbersetzungshilfe / Translation aid (English) To be returned at the end of the exam!
Prüfung Regelungstechnik I (Control Systems I) Prof. Dr. Lino Guzzella 3.. 24 Übersetzungshilfe / Translation aid (English) To be returned at the end of the exam! Do not mark up this translation aid 
More informationSystems Analysis and Control
Systems Analysis and Control Matthew M. Peet Arizona State University Lecture 24: Compensation in the Frequency Domain Overview In this Lecture, you will learn: Lead Compensators Performance Specs Altering
More information1 (s + 3)(s + 2)(s + a) G(s) = C(s) = K P + K I
MAE 43B Linear Control Prof. M. Krstic FINAL June 9, Problem. ( points) Consider a plant in feedback with the PI controller G(s) = (s + 3)(s + )(s + a) C(s) = K P + K I s. (a) (4 points) For a given constant
More informationChapter 2. Classical Control System Design. Dutch Institute of Systems and Control
Chapter 2 Classical Control System Design Overview Ch. 2. 2. Classical control system design Introduction Introduction Steadystate Steadystate errors errors Type Type k k systems systems Integral Integral
More informationROOT LOCUS. Consider the system. Root locus presents the poles of the closedloop system when the gain K changes from 0 to. H(s) H ( s) = ( s)
C1 ROOT LOCUS Consider the system R(s) E(s) C(s) + K G(s)  H(s) C(s) R(s) = K G(s) 1 + K G(s) H(s) Root locus presents the poles of the closedloop system when the gain K changes from 0 to 1+ K G ( s)
More informationIntroduction to Feedback Control
Introduction to Feedback Control Control System Design Why Control? OpenLoop vs ClosedLoop (Feedback) Why Use Feedback Control? ClosedLoop Control System Structure Elements of a Feedback Control System
More informationFREQUENCYRESPONSE DESIGN
ECE45/55: Feedback Control Systems. 9 FREQUENCYRESPONSE DESIGN 9.: PD and lead compensation networks The frequencyresponse methods we have seen so far largely tell us about stability and stability margins
More informationH(s) = s. a 2. H eq (z) = z z. G(s) a 2. G(s) A B. s 2 s(s + a) 2 s(s a) G(s) 1 a 1 a. } = (z s 1)( z. e ) ) (z. (z 1)(z e at )(z e at )
.7 Quiz Solutions Problem : a H(s) = s a a) Calculate the zero order hold equivalent H eq (z). H eq (z) = z z G(s) Z{ } s G(s) a Z{ } = Z{ s s(s a ) } G(s) A B Z{ } = Z{ + } s s(s + a) s(s a) G(s) a a
More informationINTRODUCTION TO DIGITAL CONTROL
ECE4540/5540: Digital Control Systems INTRODUCTION TO DIGITAL CONTROL.: Introduction In ECE450/ECE550 Feedback Control Systems, welearnedhow to make an analog controller D(s) to control a lineartimeinvariant
More informationLecture 6 Classical Control Overview IV. Dr. Radhakant Padhi Asst. Professor Dept. of Aerospace Engineering Indian Institute of Science  Bangalore
Lecture 6 Classical Control Overview IV Dr. Radhakant Padhi Asst. Professor Dept. of Aerospace Engineering Indian Institute of Science  Bangalore Lead Lag Compensator Design Dr. Radhakant Padhi Asst.
More informationSystems Analysis and Control
Systems Analysis and Control Matthew M. Peet Illinois Institute of Technology Lecture 22: The Nyquist Criterion Overview In this Lecture, you will learn: Complex Analysis The Argument Principle The Contour
More informationME 375 EXAM #1 Friday, March 13, 2015 SOLUTION
ME 375 EXAM #1 Friday, March 13, 2015 SOLUTION PROBLEM 1 A system is made up of a homogeneous disk (of mass m and outer radius R), particle A (of mass m) and particle B (of mass m). The disk is pinned
More informationStability of CL System
Stability of CL System Consider an open loop stable system that becomes unstable with large gain: At the point of instability, K( j) G( j) = 1 0dB K( j) G( j) K( j) G( j) K( j) G( j) =± 180 o 180 o Closed
More informationFrequency Response Analysis
Frequency Response Analysis Consider let the input be in the form Assume that the system is stable and the steady state response of the system to a sinusoidal inputdoes not depend on the initial conditions
More informationActive Control? Contact : Website : Teaching
Active Control? Contact : bmokrani@ulb.ac.be Website : http://scmero.ulb.ac.be Teaching Active Control? Disturbances System Measurement Control Controler. Regulator.,,, Aims of an Active Control Disturbances
More informationControl Systems I. Lecture 9: The Nyquist condition
Control Systems I Lecture 9: The Nyquist condition adings: Guzzella, Chapter 9.4 6 Åstrom and Murray, Chapter 9.1 4 www.cds.caltech.edu/~murray/amwiki/index.php/first_edition Emilio Frazzoli Institute
More information16.30/31, Fall 2010 Recitation # 2
16.30/31, Fall 2010 Recitation # 2 September 22, 2010 In this recitation, we will consider two problems from Chapter 8 of the Van de Vegte book. R +  E G c (s) G(s) C Figure 1: The standard block diagram
More informationD(s) G(s) A control system design definition
R E Compensation D(s) U Plant G(s) Y Figure 7. A control system design definition x x x 2 x 2 U 2 s s 7 2 Y Figure 7.2 A block diagram representing Eq. (7.) in control form z U 2 s z Y 4 z 2 s z 2 3 Figure
More informationSchool of Mechanical Engineering Purdue University
Case Study ME375 Frequency Response  1 Case Study SUPPORT POWER WIRE DROPPERS Electric train derives power through a pantograph, which contacts the power wire, which is suspended from a catenary. During
More informationECE 486 Control Systems
ECE 486 Control Systems Spring 208 Midterm #2 Information Issued: April 5, 208 Updated: April 8, 208 ˆ This document is an info sheet about the second exam of ECE 486, Spring 208. ˆ Please read the following
More informationMAE 143B  Homework 9
MAE 43B  Homework 9 7.2 2 2 3.8.6.4.2.2 9 8 2 2 3 a) G(s) = (s+)(s+).4.6.8.2.2.4.6.8. Polar plot; red for negative ; no encirclements of, a.s. under unit feedback... 2 2 3. 4 9 2 2 3 h) G(s) = s+ s(s+)..2.4.6.8.2.4
More informationLecture 1: Feedback Control Loop
Lecture : Feedback Control Loop Loop Transfer function The standard feedback control system structure is depicted in Figure. This represend(t) n(t) r(t) e(t) u(t) v(t) η(t) y(t) F (s) C(s) P (s) Figure
More informationSystems Analysis and Control
Systems Analysis and Control Matthew M. Peet Illinois Institute of Technology Lecture 23: Drawing The Nyquist Plot Overview In this Lecture, you will learn: Review of Nyquist Drawing the Nyquist Plot Using
More informationDr Ian R. Manchester Dr Ian R. Manchester AMME 3500 : Review
Week Date Content Notes 1 6 Mar Introduction 2 13 Mar Frequency Domain Modelling 3 20 Mar Transient Performance and the splane 4 27 Mar Block Diagrams Assign 1 Due 5 3 Apr Feedback System Characteristics
More informationECE 388 Automatic Control
Lead Compensator and PID Control Associate Prof. Dr. of Mechatronics Engineeering Çankaya University Compulsory Course in Electronic and Communication Engineering Credits (2/2/3) Course Webpage: http://ece388.cankaya.edu.tr
More informationMAE143a: Signals & Systems (& Control) Final Exam (2011) solutions
MAE143a: Signals & Systems (& Control) Final Exam (2011) solutions Question 1. SIGNALS: Design of a noisecancelling headphone system. 1a. Based on the lowpass filter given, design a highpass filter,
More informationTopic # Feedback Control Systems
Topic #20 16.31 Feedback Control Systems Closedloop system analysis Bounded Gain Theorem Robust Stability Fall 2007 16.31 20 1 SISO Performance Objectives Basic setup: d i d o r u y G c (s) G(s) n control
More informationELECTRONICS & COMMUNICATIONS DEP. 3rd YEAR, 2010/2011 CONTROL ENGINEERING SHEET 5 LeadLag Compensation Techniques
CAIRO UNIVERSITY FACULTY OF ENGINEERING ELECTRONICS & COMMUNICATIONS DEP. 3rd YEAR, 00/0 CONTROL ENGINEERING SHEET 5 LeadLag Compensation Techniques [] For the following system, Design a compensator such
More informationRichiami di Controlli Automatici
Richiami di Controlli Automatici Gianmaria De Tommasi 1 1 Università degli Studi di Napoli Federico II detommas@unina.it Ottobre 2012 Corsi AnsaldoBreda G. De Tommasi (UNINA) Richiami di Controlli Automatici
More informationRoot Locus Design Example #3
Root Locus Design Example #3 A. Introduction The system represents a linear model for vertical motion of an underwater vehicle at zero forward speed. The vehicle is assumed to have zero pitch and roll
More informationTopic # Feedback Control Systems
Topic #19 16.31 Feedback Control Systems Stengel Chapter 6 Question: how well do the large gain and phase margins discussed for LQR map over to DOFB using LQR and LQE (called LQG)? Fall 2010 16.30/31 19
More informationFrequency Response of Linear Time Invariant Systems
ME 328, Spring 203, Prof. Rajamani, University of Minnesota Frequency Response of Linear Time Invariant Systems Complex Numbers: Recall that every complex number has a magnitude and a phase. Example: z
More informationControl Systems I. Lecture 6: Poles and Zeros. Readings: Emilio Frazzoli. Institute for Dynamic Systems and Control DMAVT ETH Zürich
Control Systems I Lecture 6: Poles and Zeros Readings: Emilio Frazzoli Institute for Dynamic Systems and Control DMAVT ETH Zürich October 27, 2017 E. Frazzoli (ETH) Lecture 6: Control Systems I 27/10/2017
More informationCDS 101/110a: Lecture 101 Robust Performance
CDS 11/11a: Lecture 11 Robust Performance Richard M. Murray 1 December 28 Goals: Describe how to represent uncertainty in process dynamics Describe how to analyze a system in the presence of uncertainty
More informationControls Problems for Qualifying Exam  Spring 2014
Controls Problems for Qualifying Exam  Spring 2014 Problem 1 Consider the system block diagram given in Figure 1. Find the overall transfer function T(s) = C(s)/R(s). Note that this transfer function
More informationRobust Performance Example #1
Robust Performance Example # The transfer function for a nominal system (plant) is given, along with the transfer function for one extreme system. These two transfer functions define a family of plants
More informationECSE 4962 Control Systems Design. A Brief Tutorial on Control Design
ECSE 4962 Control Systems Design A Brief Tutorial on Control Design Instructor: Professor John T. Wen TA: Ben Potsaid http://www.cat.rpi.edu/~wen/ecse4962s04/ Don t Wait Until The Last Minute! You got
More informationExercises for lectures 13 Design using frequency methods
Exercises for lectures 13 Design using frequency methods Michael Šebek Automatic control 2016 31317 Setting of the closed loop bandwidth At the transition frequency in the open loop is (from definition)
More information1 (20 pts) Nyquist Exercise
EE C128 / ME134 Problem Set 6 Solution Fall 2011 1 (20 pts) Nyquist Exercise Consider a close loop system with unity feedback. For each G(s), hand sketch the Nyquist diagram, determine Z = P N, algebraically
More informationSTABILITY ANALYSIS. Asystemmaybe stable, neutrallyormarginallystable, or unstable. This can be illustrated using cones: Stable Neutral Unstable
ECE4510/5510: Feedback Control Systems. 5 1 STABILITY ANALYSIS 5.1: Boundedinput boundedoutput (BIBO) stability Asystemmaybe stable, neutrallyormarginallystable, or unstable. This can be illustrated
More informationFEL3210 Multivariable Feedback Control
FEL3210 Multivariable Feedback Control Lecture 5: Uncertainty and Robustness in SISO Systems [Ch.7(8)] Elling W. Jacobsen, Automatic Control Lab, KTH Lecture 5:Uncertainty and Robustness () FEL3210 MIMO
More informationControl Systems I. Lecture 9: The Nyquist condition
Control Systems I Lecture 9: The Nyquist condition Readings: Åstrom and Murray, Chapter 9.1 4 www.cds.caltech.edu/~murray/amwiki/index.php/first_edition Jacopo Tani Institute for Dynamic Systems and Control
More informationDesign and Tuning of Fractionalorder PID Controllers for Timedelayed Processes
Design and Tuning of Fractionalorder PID Controllers for Timedelayed Processes Emmanuel Edet Technology and Innovation Centre University of Strathclyde 99 George Street Glasgow, United Kingdom emmanuel.edet@strath.ac.uk
More informationSystems Analysis and Control
Systems Analysis and Control Matthew M. Peet Illinois Institute of Technology Lecture 2: Drawing Bode Plots, Part 2 Overview In this Lecture, you will learn: Simple Plots Real Zeros Real Poles Complex
More informationLoop shaping exercise
Loop shaping exercise Excerpt 1 from Controlli Automatici  Esercizi di Sintesi, L. Lanari, G. Oriolo, EUROMA  La Goliardica, 1997. It s a generic book with some typical problems in control, not a collection
More informationMAS107 Control Theory Exam Solutions 2008
MAS07 CONTROL THEORY. HOVLAND: EXAM SOLUTION 2008 MAS07 Control Theory Exam Solutions 2008 Geir Hovland, Mechatronics Group, Grimstad, Norway June 30, 2008 C. Repeat question B, but plot the phase curve
More informationProfessor Fearing EE C128 / ME C134 Problem Set 7 Solution Fall 2010 Jansen Sheng and Wenjie Chen, UC Berkeley
Professor Fearing EE C8 / ME C34 Problem Set 7 Solution Fall Jansen Sheng and Wenjie Chen, UC Berkeley. 35 pts Lag compensation. For open loop plant Gs ss+5s+8 a Find compensator gain Ds k such that the
More informationChapter 6  Solved Problems
Chapter 6  Solved Problems Solved Problem 6.. Contributed by  James Welsh, University of Newcastle, Australia. Find suitable values for the PID parameters using the ZN tuning strategy for the nominal
More informationTransient response via gain adjustment. Consider a unity feedback system, where G(s) = 2. The closed loop transfer function is. s 2 + 2ζωs + ω 2 n
Design via frequency response Transient response via gain adjustment Consider a unity feedback system, where G(s) = ωn 2. The closed loop transfer function is s(s+2ζω n ) T(s) = ω 2 n s 2 + 2ζωs + ω 2
More informationMEM 355 Performance Enhancement of Dynamical Systems
MEM 355 Performance Enhancement of Dynamical Systems Frequency Domain Design Harry G. Kwatny Department of Mechanical Engineering & Mechanics Drexel University 5/8/25 Outline Closed Loop Transfer Functions
More informationControl for. Maarten Steinbuch Dept. Mechanical Engineering Control Systems Technology Group TU/e
Control for Maarten Steinbuch Dept. Mechanical Engineering Control Systems Technology Group TU/e Motion Systems m F Introduction Timedomain tuning Frequency domain & stability Filters Feedforward Servooriented
More informationSystems Analysis and Control
Systems Analysis and Control Matthew M. Peet Arizona State University Lecture 23: Drawing The Nyquist Plot Overview In this Lecture, you will learn: Review of Nyquist Drawing the Nyquist Plot Using the
More informationr +  FINAL June 12, 2012 MAE 143B Linear Control Prof. M. Krstic
MAE 43B Linear Control Prof. M. Krstic FINAL June, One sheet of handwritten notes (two pages). Present your reasoning and calculations clearly. Inconsistent etchings will not be graded. Write answers
More informationMASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Mechanical Engineering Dynamics and Control II Fall K(s +1)(s +2) G(s) =.
MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Mechanical Engineering. Dynamics and Control II Fall 7 Problem Set #7 Solution Posted: Friday, Nov., 7. Nise problem 5 from chapter 8, page 76. Answer:
More informationCDS 101/110a: Lecture 102 Control Systems Implementation
CDS 101/110a: Lecture 102 Control Systems Implementation Richard M. Murray 5 December 2012 Goals Provide an overview of the key principles, concepts and tools from control theory  Classical control 
More informationCHAPTER 7 : BODE PLOTS AND GAIN ADJUSTMENTS COMPENSATION
CHAPTER 7 : BODE PLOTS AND GAIN ADJUSTMENTS COMPENSATION Objectives Students should be able to: Draw the bode plots for first order and second order system. Determine the stability through the bode plots.
More informationK(s +2) s +20 K (s + 10)(s +1) 2. (c) KG(s) = K(s + 10)(s +1) (s + 100)(s +5) 3. Solution : (a) KG(s) = s +20 = K s s
321 16. Determine the range of K for which each of the following systems is stable by making a Bode plot for K = 1 and imagining the magnitude plot sliding up or down until instability results. Verify
More informationSTABILITY ANALYSIS TECHNIQUES
ECE4540/5540: Digital Control Systems 4 1 STABILITY ANALYSIS TECHNIQUES 41: Bilinear transformation Three main aspects to controlsystem design: 1 Stability, 2 Steadystate response, 3 Transient response
More informationH 2 Optimal State Feedback Control Synthesis. Raktim Bhattacharya Aerospace Engineering, Texas A&M University
H 2 Optimal State Feedback Control Synthesis Raktim Bhattacharya Aerospace Engineering, Texas A&M University Motivation Motivation w(t) u(t) G K y(t) z(t) w(t) are exogenous signals reference, process
More informationLecture 11. Frequency Response in Discrete Time Control Systems
EE42  Discrete Time Systems Spring 28 Lecturer: Asst. Prof. M. Mert Ankarali Lecture.. Frequency Response in Discrete Time Control Systems Let s assume u[k], y[k], and G(z) represents the input, output,
More informationEngraving Machine Example
Engraving Machine Example MCE44  Fall 8 Dr. Richter November 24, 28 Basic Design The Xaxis of the engraving machine has the transfer function G(s) = s(s + )(s + 2) In this basic example, we use a proportional
More informationUncertainty and Robustness for SISO Systems
Uncertainty and Robustness for SISO Systems ELEC 571L Robust Multivariable Control prepared by: Greg Stewart Outline Nature of uncertainty (models and signals). Physical sources of model uncertainty. Mathematical
More informationAn Internal Stability Example
An Internal Stability Example Roy Smith 26 April 2015 To illustrate the concept of internal stability we will look at an example where there are several polezero cancellations between the controller and
More information