The ABS light on a Vehicles is designed come alert the driver to potential troubles with any part of the anti-lock braking system. The ABS computer continuously monitors a number of sensors transparent the Vehicles in order to ensure that the anti-lock braking system is functioning appropriately Vehicles all times. As soon as the ABS computer system detects a trouble with the system, it stores a trouble password in its internal memory and turns on the ABS light. One automotive scan tool with ABS capability is the just tool that can properly clear the codes from the ABS computer system in stimulate to turn off the ABS light.

Under The Hood:

How to Reset the ABS irradiate on an Astro Van

Take the car to a mechanic and also have the anti-lock brake system checked and also any crucial repairs made. Usually this will turn off the ABS light, yet not always. If not, proceed to step 2.

You are watching: How to clear abs light on ford

Put the crucial into the ignition and turn it come the "Run" position (the place right prior to the one offered to engage the engine).

Locate the DIC regulate panel ~ above the dashboard in prior of the driver"s seat under the speedometer. Save pushing and releasing the "Set" switch on the DIC regulate panel until "ABS" is shown.

Hold the "Set" switch for around 5 secs to reset the light and turn it off.

Turn the crucial in the ignition to the "Off " position and also remove the key.

Items you will need

Ignition key

How to Reset the ABS light on a 2000 Ford Explorer

Turn the ignition to the "on" place (the second position) on the ignition.

Open her Explorer"s hood and loosen the retaining seed on the an adverse battery cable clamp utilizing a socket wrench and also a 10 millimeter socket.

Slide the clamp turn off the negative battery terminal and also wait 3 to five minutes.

Reconnect the cable clamp and also tighten the retaining nut.

Check the dash come verify the the ABS light has actually gone out. This procedure also resets all problem codes in the Explorer"s computer, therefore all other warning lights will certainly reset as well.

Items you will certainly need

Socket wrench

Socket set

How to Reset the ABS light on a Ford

Put the crucial into the ignition and also turn it come the 2nd position. This is the position just before the engine starts.

Open the hood that the Ford and also loosen the nut on the an adverse battery cable clamp. You deserve to do this v a 10mm wrench.

Slip the clamp turn off the an adverse side that the battery and wait around 5 minutes.

Put the clamp ago in place and also tighten the nut. Look at on the dashboard come make certain the ABS light has turned off. This resets all lights in the car and also the clock together well.

Items you will certainly need

10mm open-end wrench

Ignition key

How come Reset the ABS irradiate on a BMW E36

Drive the car onto a flat surface and change the transmission into "Park" or very first gear (manual transmission). Revolve off the engine and apply the parking brake. Revolve the ignition earlier to the “On” place so the dashboard has power.

Locate the vehicle’s diagnostic data port. This port is situated underneath the dashboard, just above the pedal area. That is roughly 2 inches wide, a half-inch tall and also made from black color plastic.

Connect the scan tool’s data cable come the diagnostic data port. Strength on the scan tool and also choose “ABS” native the scan tool’s key menu.

Choose “Trouble Codes” from the ABS menu. Select “Clear all Current and Stored problem Codes” indigenous the problem Codes menu. Wait a moment while the scan tool clears the problem codes.

Turn off the scan tool, unplug that from the vehicle and also start the engine. Confirm that the ABS light is no much longer on.

Items you will certainly need

Automotive scan tool

an ext Articles

How to Reboot the BCM on mine 2001 Saturn ...

How to Reset the Airbag on a Chevy ...

How to turn Off one Airbag in Ford Focus

How to Reset a Malibu waiting Bag Light

How to Reset the inspect Engine irradiate on ...
How to turn Off a Jeep cool Cherokee ...
How perform I revolve off a maintenance Light ...

See more: How To Separate Sand And Sugar And Sand? How To Separate A Mixture Of Sugar And Sand

How to Reset GM Airbag Light
How come Reset a Cadillac"s "Service ...