Draw weight is the necessary force, in pounds, necessary to carry the link bow to complete draw. Shooting the suitable poundage is very important for this reason that forced kinetic power needed is met without sacrificing suitable shooting form.

You are watching: How to adjust draw weight on a compound bow

Before adjusting her poundage, the limbs may be “locked” into their existing position through locking bolts. These would certainly be located just below the height limb or above the bottom limb and also are screwed right into the riser. To adjust the body bolts, this bolts have to be loosened first. ~ adjustment, they can then as soon as again it is in tightened.

To adjust the draw weight, we need to unload or load more stress and anxiety (flex) top top the limbs; we execute that by tightening or loosening the body bolts.

To raise attract weight to best poundage, tighten the limb bolts (clockwise) till both limbs space tight against the riser.

To lower the attract weight us unscrew the limb bolts same on every limb (counterclockwise).

Safety Precaution: Be cautious that you do not unscrew the limb bolts pass the bow’s lowest load setting. If the limb bolts room unscrewed also much, the limb bolt’s threads have the right to come the end of the riser and also cause damages to the bow and also injure the mechanic.

Every bow’s limbs have a certain draw weight rating: 50-60, 60-70, 70-80, etc. To inspect to watch if a bow is in “spec” (at its specified manufacturer’s measurements) tighten (clockwise) the limb bolts till the limbs are versus the riser. The bow will now be in ~ the preferably poundage and maximum draw weight, ATA measurement, and also brace height measurement have the right to be verified.

To raise draw weight

Tighten the limb bolts till the limbs space tight come the riser.


To lower draw weight

First, raise the drawing weight to its max. Next, unscrew both limb bolts one transformation (360°) and check the poundage on a bow scale. Repeat this process until you reach your preferred draw weight. Just attempt to shoot draw weights in the limb’s specified selection (50-60 lbs, 60-70 lbs). If they are not marked, max out the draw weight and also your lowest attract weight will certainly be 10 lbs lighter in many cases. Once using a bow scale, hook the string to the scale’s hook in ~ the nocking point and pull under on her bow’s riser until your bow is at it’s “roll over” spot on the cams and also look in ~ the scale for its attract weight. Try not to role the cam(s) over, however if friend do, make sure you keep a an excellent grip as soon as raising the bow ago up to take it off the scale… it’ll shot to take you for a ride!


How To uncover Your Ideal draw Weight

To discover your right poundage, sit down on a chair or tailgate that a truck and pull your bow ago with your feet turn off the ground. If you are comfortable through the poundage and also can hold full attract comfortably, the poundage is whereby you require it. If the poundage seems high (it was hard to pull earlier and hold) reduced the draw weight in 2 lb increments till you have uncovered a comfortable attract weight.

See more: Why Does Naruto Say Believe It " In Part 1 Naruto, Why Does Naruto Always Say Believe It

Average draw weights

Smaller youngsters (45-65 lbs) = 10-20lbsChildren (65-95 lbs) = 20-35lbsWomen and also boys (95-125 lbs) = 35-45 lbsLarger women and boys (125-145 lbs) = 45-55 lbsMen (145-175 lbs) = 55-65 lbsMuscular men = 60-70 lbsMuscular barbarians = 70-100 lbs

Although this are mean drawing weights, it is crucial to shoot what is comfortable for you. Any type of attempt to draw an ext weight 보다 you have to will an outcome in wrong archery form and impact accuracy.